Bergolin 1-Component Topcoat 6P1600 – Reduced process times, easy handling and VOC-free

The comparison of 1C and 2C coating systems, and the associated discussion regarding the differences in their performance, has been a topic for many years, not only for applications in the wind power industry. With over 20 years of experience in coating rotor blades, Bergolin GmbH & Co. KG has developed a solution that allows users to deploy 1C systems without performance losses while at the same time improving process times.

As a full-range supplier for rotor blade coating, repair and maintenance, Bergolin has developed Bergolin 1-Component Topcoat 6P1600, a fast-drying 1-component coating system that combines the advantages of 1C and 2C systems. It is an HSE-compliant aqueous system with very good durability properties that is ideally suited for use in the factory or during maintenance.

Photo: Topcoat – Easy handling, easy application

Photo: Topcoat – Easy handling, easy application
© Bergolin

Process times reduced by 45 percent

On top of these advantages process times are shorter. Even for a two-layer coating, process times can be reduced by up to 45 percent. Especially when compared to conventional single-layer 2C systems, there are considerable process advantages. The greatest time savings are achieved through the very short drying times. Drying level 7 is reached after just 120 minutes and the rotor blade is ready for further production steps.

In demanding application scenarios, 1C systems have often been avoided up to now. In terms of resistance, the 1-Component Topcoat 6P1600 from Bergolin achieves the performance level of conventional 2-component systems. With its very good resistance to mechanical and chemical stress, it is suitable for almost all weather and climatic conditions. Rotor blade surfaces made of GRP can thus be effectively protected against high weather exposure and strong UV radiation.

Easy handling and VOC-free

Users get all the benefits of a 1-component coating system with Bergolin 1-Component Topcoat 6P1600. This state-of-the-art topcoat from Bergolin does not contain any volatile organic compounds (VOC-free) and is easy to use. Mixing with hardeners is eliminated, and so is pot life, enabling technicians to achieve more even application quality on the rotor blades.

Chart: Comparison of Bergolin 1-Component Topcoat 6P1600 with conventional 2-component systems © Bergolin

Chart: Comparison of Bergolin 1-Component Topcoat 6P1600 with conventional 2-component systems © Bergolin

Chart: Comparison of process times of Bergolin-1-Component Topcoat 6P1600 and other 2C coating systems

Chart: Comparison of process times of Bergolin-1-Component Topcoat 6P1600 and other 2C coating systems
© Bergolin

Bergolin GmbH & Co. KG

Bergolin GmbH & Co. KG was founded in 1909 and is a globally active company with headquarters in Germany. The company specializes in the development and manufacturing of high-quality individual coating systems and has a large product range for a wide variety of applications in the field of rotor blade production and maintenance. Bergolin has more than 20 years of experience in the repair and development of rotor blade coatings and offers the right system for every requirement, from gelcoat to leading edge protection. With over 100,000 coated examples for various OEMs, we are one of the world’s most important suppliers in this market segment.

Our customers appreciate the partnership like cooperation with Bergolin. The experts at Bergolin develop solutions together with the customer that are precisely tailored to individual requirements and processes. Customers benefit from optimized processes and longer service lives. With its subsidiaries in Poland, China, India and the USA, as well as a worldwide network of cooperation partners, Bergolin offers a high quality of service close to the customer. For more information, visit www.bergolin.com.

 

5151 Characters, including blank spaces.

Contact

Dr. Matthias Otting
Bergolin GmbH & Co. KG
Managing Director
T +49 4795 / 95899-101
E info@bergolin.de

 

 

Press Contact

Andrea Zaszczynski
AzetPR International Public Relations
Wrangelstraße 111
20253 Hamburg
Germany
T +49 (0)40 413270 0
F +49 (0)40 413270 70
E  andreaz@azetpr.com