Bergolin Aeroglide Topcoat 6D3800-P – Styrene-free alternative to common polyester materials

With Aeroglide Topcoat 6D3800-P, Bergolin provides wind turbine manufacturers with an innovative 2C-gelcoat that offers a styrene-free alternative to conventional polyester materials. For Bergolin’s laboratory team, it was important to surpass the properties of common polyester-based systems and combine high performance with current HSE criteria. The result is a gelcoat that is more flexible in application and significantly more weather-resistant than polyester.

Photo: The Bergolin research and development laboratory in Osterholz-Scharmbeck

Photo: The Bergolin research and development laboratory in Osterholz-Scharmbeck
© Bergolin

The 2-component coating system impresses with excellent adhesion to polyester GRP and is thus ideally suited for use in nacelle coating. Aeroglide Topcoat 6D3800-P is compatible with all common application methods. Both with a 2-chamber cartridge with static mixer as well as with a 2-component airless system, sufficient topcoats can be produced from a dry film thickness of 400µm.

User-friendly and HSE-compliant

With a pot life of 15 minutes and a processing time of up to seven minutes, Bergolin presents a solvent-free, pigmented and lightfast 2-component liquid plastic optimized for coating composites based on GFRP and CFRP.

In addition, Aeroglide Topcoat 6D3800-P helps users comply with labor law safety standards. The latest 2C-gelcoat from Bergolin makes a significant contribution to compliance with workplace exposure limits, thus increasing the effectiveness of personal protective equipment. With a post-mix VOC content of 0.27 g/L, emissions from volatile organic compounds (VOCs) can be significantly reduced in the workplace.

Photo: User-friendly and HSE-compliant

Photo: User-friendly and HSE-compliant
© Bergolin

Bergolin GmbH & Co. KG

Bergolin GmbH & Co. KG was founded in 1909 and is a globally active company with headquarters in Germany. The company specializes in the development and manufacturing of high-quality individual coating systems and has a large product range for a wide variety of applications in the field of rotor blade production and maintenance. Bergolin has more than 20 years of experience in the repair and development of rotor blade coatings and offers the right system for every requirement, from gelcoat to leading edge protection. With over 100,000 coated examples for various OEMs, we are one of the world’s most important suppliers in this market segment.

Our customers appreciate the partnership like cooperation with Bergolin. The experts at Bergolin develop solutions together with the customer that are precisely tailored to individual requirements and processes. Customers benefit from optimized processes and longer service lives. With its subsidiaries in Poland, China, India and the USA, as well as a worldwide network of cooperation partners, Bergolin offers a high quality of service close to the customer. For more information, visit www.bergolin.com.

 

3718 Characters, including blank spaces.

Contact

Dr. Matthias Otting
Bergolin GmbH & Co. KG
Managing Director
T +49 4795 / 95899-101
E info@bergolin.de

 

 

Press Contact

Andrea Zaszczynski
AzetPR International Public Relations
Wrangelstraße 111
20253 Hamburg
Germany
T +49 (0)40 413270 0
F +49 (0)40 413270 70
E  andreaz@azetpr.com